How to Roof a House – THE BASICS
So you are looking for some good information on how to roof a house. You are probably not as adept at DIY repairs as a professional roofer is, so this article will teach you the basics. This first article in a series will cover the basics of installing a new roof. There is a lot that you need to know before taking on the challenge of installing your first roof.
Before you even start, make sure you have all the tools and materials you will need handy. Go to your local Home Depot or Lowe’s and get a list of all the necessary supplies you will need. Make sure you have a complete list of all the tools because once you get started you may be surprised by the number of tools you will need. Also, bring a piece of paper with you to write the names of each tool on so that you remember which is what when you get to work.
Your main concern will be the actual building of the roof
The first thing to do is to determine if the existing roof is in good shape, if it needs to be replaced, or if you will have to install a brand new roof. The best way to find out the answers to these questions is to simply look at your existing roof to see if anything needs to be repaired.
If you need to replace the roof, then the first thing you will need to do is to check the nails or shingles that are holding the shingles together. If they are damaged then they will have to be replaced. After replacing them, you will then want to nail all of the shingles together. Be sure to nail them in the same order so that they will have a solid grip.
Once you have installed the shingles, then you can move on to the next part of the job – the roof
Start by laying the tar paper on the roof. Make sure to straighten it before you begin installing any of the tiles. Next, you will want to install the first few tiles. Continue this process until you reach the bottom of the house.
When you are installing the first few nails, use your safety goggles to make sure that you don’t get any of the nails in your eyes. Then, remove them. The nails will be positioned in a way where they are visible to you, so you need to do this very carefully. Take your time and install them evenly.
When you are installing the shingles, you want to make sure that they are placed accurately to get the best results. If you don’t do this properly then you will notice that some of the shingles will not lay properly. It will look like they are not connected to each other at all. This could be because the nails that you used weren’t evenly spaced out or because you used nails that were too big for the shingles. Try to measure the roof before you start installing anything else. Once you know how much space is available for the roof, you can go ahead and start laying the rest of the roof.
If you follow these basics you will be well on your way to learning how to roof a house – The Basics. Just remember that it takes time and work to finish the roof. It may seem like a daunting task when you first start, but once you have the hang of it you will feel great knowing that you did it yourself. Good luck!